DIGIPOD A2540 SOFTWARE
The DP Control software gives the user access to a comprehensive set of controls for fine tuning the subwoofer/satellite system, while keeping things simple, organized, and easy to use. The new DPSW300 and DPSW1000 subwoofer amplifiers are “cURus” and “CE” (recognized component markings by UL for North America and Europe) and electromagnetic capability (EMC) compliant for the Federal Communications Commission (FCC) and European Conformity (CE), making the task of getting system approvals much easier and with lower agency costs.įigure 2: THD versus Power, 4-Ω load, for the DPSW1000 The combination of a powered subwoofer with programmable left and right high-pass filtered line-level output channels makes these amplifiers with built-in user programmable DSP ideal for use as a 2.1 satellite/subwoofer system with powered satellite speakers (e.g., typically studio monitors).
Line level filtered output signal connections for full-range powered speakers are made using left/right XLR and RCA connectors. Stereo XLR and RCA connectors are revised to make cable connections. A pair of wires on the back of the amplifier connects the powered subwoofer output to the subwoofer driver. These subwoofer amplifiers accept balanced or unbalanced input connections. An external volume control, a power switch, an IEC cord connector, a 12-V trigger jack, and a switch for selecting the turn-on options (i.e., 12-V trigger and Auto On or On) are located on the DPSW300 and DPSW1000 amplifiers’ amp panels. Plate dimensions for both the DPSW300 and DPSW1000 are 12” high × 10.25” wide, mounting depth is only 3.5”, including the speaker wires. The signal-to-noise ratio is greater than 100 dB. The DPSW300’s power output is 300 W, and the DPSW1000’s power output is 1,000 W with less than 1% THD driving a 4-Ω load (see Figure 1 and Figure 2).
DIGIPOD A2540 SERIES
The new DPSW300 and DPSW1000 models use high-efficiency, full-bandwidth, 20-Hz-to-20-kHz Abletec (i.e., the DDC series using Ice Power Class-D amps) Class-D amplifier modules (with patented technology for enhanced audio quality) and a newly developed KSC-proprietary DSP engine design (see Photo 2).
As with the D-Pro GUI and D-Pro Control software, DP Control software communicates to the DSP engines via a USB cable.
DIGIPOD A2540 PC
Designed to program all DSP features using fewer menu selections and less mouse clicks, it is both Mac and PC operating system compatible. Similar to D-Pro Control software, the new DP Control software provides complete user programming of the DSP functions in the new DP subwoofer amplifier line. Input and output connectors. They are available in D-Pro control enables end-users with access to only the specific DSP features the manufacturer determines (e.g., the adjustable compressor/limiter).Īre the same size and have the same controls and Also available for the DDC series, Digmoda developed a manufacture customizable version named D-Pro Control. The DP line consists of two new software programmable amplifiers, the DPSW300 and DPSW1000, along with newly developed DSP software for these units.Ĭurrent Digmoda DDC Series amplifier models continue to use KSC’s proprietary DSP engine and D-Pro GUI software that programs the DDC Series amplifiers (see Photo 1). In 2013, Digmoda released the Digital Power (DP) line of new price competitive subwoofer plate amplifiers. The platforms are modular in design and easy to configure to meet a wide range of requirements. Photo 1: Digmoda DDC Series with D-PRO GUI softwareĭigmoda is a series of OEM platforms consisting of digital amplifiers, DSPs, and power supplies designed specifically for audio applications.
0 kommentar(er)
